search_button
Search
Print Page  Register Login
You are Here: Linear Actuator Products > Stepper Motor Linear Actuators > Linear Actuators - Canstack > Z26000 Linear Actuator Thursday, September 02, 2010
Newsletter Signup
Submit
Latest News

CHARACTERISTICS TECHNICAL DIAGRAMS PERFORMANCE CURVES 3D MODEL

Z26000 SERIES - 26mm (1") LINEAR ACTUATOR

Utilizing rare earth (neodymium) magnets, the Z-Series linear actuators consistently deliver exceptional performance at an economical price. Also available in a special “earless” configuration without a mounting flange, which is ideal for space constrained applications. Three motors are available... captive, non-captive and external linear. All units are built with reliable dual ball bearings. The motors are ideally suited for high volume, price sensitive applications.

Also available in Extended Stroke

Part Number Selection Guide

Standard motors are Class B rated for maximum temperature of 130°C.

 
Captive Non-Captive External
» Technical Drawing
Download 2D/3D Model
» Technical Drawing
Download 2D/3D Model

SALIENT CHARACTERISTICS - SERIES Z26000

  
Z26000 Series Canstack Linear Actuator
Part Number Captive Z-2644(X)-V Z-2654(X)-V Z-2646(X)-V Z-2656(X)-V

 		 Non-Captive Z-2634(X)-V Z-2684(X)-V Z-2636(X)-V Z-2686(X)-V

 		 External Z-2644(X)-V Z-2654(X)-V Z-2646(X)-V Z-2656(X)-V
Wiring Bipolar Unipolar**
Step Angle 7.5° 15° 7.5° 15°
Operating Voltage 5 VDC 12 VDC 5VDC 12 VDC 5 VDC 12 VDC 5 VDC 12 VDC
Current / Phase 340 mA 140 mA 340 mA 140 mA 340 mA 140 mA 340 mA 140 mA
Resistance / Phase 14.7 ohms 84  ohms 14.7 ohms 84  ohms 14.7 ohms 84   ohms 14.7 ohms 84  ohms
Inductance / Phase 8.5 mH 55 mH 6.7 mH 44 mH 4.3 mH 24 mH 3.4 mH 19 mH
Power Consumption 3.4 W
Rotor Inertia 1.4 gcm2
Temperature rise 135° F (75°C) Rise
Weight 1.2 oz. ( 34 g)
Insulation resistance 20M ohms

*Special drive considerations may be necessary when leaving shaft fully extended or fully retracted.
**Unipolar drive gives approximately 30% less thrust than bipolar drive.

 
LINEAR TRAVEL STEP - SERIES Z26000

 

Step Inches mm Order Code ID
7.5° 0..0005 0.013 3
7.5° 0.001 0.0254 1
7.5° 0.002 0.051 2
15° 0.00164 0.04166 AS
15° 0.002 0.051 2
15° 0.004 0.102 4

 
DIMENSIONAL DRAWING - Z26000 SERIES

Captive Shaft
DIMENSIONAL DRAWING - Z26000 SERIES

Non-Captive
DIMENSIONAL DRAWING - Z26000 SERIES

External
PERFORMANCE CURVES - Z26000 SERIES / STEP RATE VS. THRUST

 

BIPOLAR L/R DRIVE 100% DUTY CYCLE

 

 

BIPOLAR L/R DRIVE 25% DUTY CYCLE
25% Duty cycle is obtained by a special winding or by running a standard motor at double the rated voltage


NOTE:Ramping can increase the performance of a motor either by increasing the top speed or getting a heavier load accelerated up to speed faster. Also, deceleration can be used to stop the motor without overshoot.

 
PERFORMANCE CURVES - Z26000 SERIES / STEP RATE VS. THRUST

 

 BIPOLAR CHOPPER DRIVE 100% DUTY CYCLE

BIPOLAR CHOPPER DRIVE 25% DUTY CYCLE
25% Duty cycle is obtained by a special winding or by running a standard motor at double the rated voltage

NOTE:All chopper drive curves were created with a 5 Volt motor and a 40 Volt power supply.

Ramping can increase the performance of a motor either by increasing the top speed or getting a heavier load accelerated up to speed faster. Also, deceleration can be used to stop the motor without overshoot.

 

1500 Meriden Road Waterbury, CT 06705 · Tel: 203-756-7441 · Fax: 203-756-8724 · Toll Free: 800-243-2715
Dot Net Nuke Site Designed By Progressive Scale and Software Solutions