Part Number Construction
 
Newsletter Sign Up
Name
Email
Submit
Questions?  Call 800-243-2715
      
       Download Catalog
Related Companies & Brands
 
 
CHARACTERISTICS TECHNICAL DIAGRAMS PERFORMANCE CURVES 3D MODEL

Z26000 SERIES - 26mm (1") LINEAR ACTUATOR

Utilizing rare earth (neodymium) magnets, the Z-Series linear actuators consistently deliver exceptional performance at an economical price. Also available in an “earless” configuration without a mounting flange, which is ideal for space constrained applications. Three motors are available... captive, non-captive and external linear. All units are built with reliable dual ball bearings. The motors are ideally suited for high volume, price sensitive applications.

Standard Lubrication Options - Grease, TFE Coating

Also available in Extended Stroke

Part Number Selection Guide

Standard motors are Class B rated for maximum temperature of 130°C.

 

Captive Non-Captive External
» Technical Drawing
Download 2D/3D Model
» Technical Drawing
Download 2D/3D Model

SALIENT CHARACTERISTICS - SERIES Z26000

  

Z26000 Series Canstack Linear Actuator
Part Number Captive Z-2644(X)-V Z-2654(X)-V Z-2646(X)-V Z-2656(X)-V

 
Non-Captive Z-2634(X)-V Z-2684(X)-V Z-2636(X)-V Z-2686(X)-V

 
External Z-2644(X)-V Z-2654(X)-V Z-2646(X)-V Z-2656(X)-V
Wiring Bipolar Unipolar**
Step Angle 7.5° 15° 7.5° 15°
Operating Voltage 5 VDC 12 VDC 5VDC 12 VDC 5 VDC 12 VDC 5 VDC 12 VDC
Current / Phase 340 mA 140 mA 340 mA 140 mA 340 mA 140 mA 340 mA 140 mA
Resistance / Phase 14.7 ohms 84  ohms 14.7 ohms 84  ohms 14.7 ohms 84   ohms 14.7 ohms 84  ohms
Inductance / Phase 8.5 mH 55 mH 6.7 mH 44 mH 4.3 mH 24 mH 3.4 mH 19 mH
Power Consumption 3.4 W
Rotor Inertia 1.4 gcm2
Temperature rise 135° F (75°C) Rise
Weight 1.2 oz. ( 34 g)
Insulation resistance 20M ohms

*Special drive considerations may be necessary when leaving shaft fully extended or fully retracted.
**Unipolar drive gives approximately 30% less thrust than bipolar drive.

 

LINEAR TRAVEL STEP - SERIES Z26000

 

Step Inches mm Order Code ID
7.5° 0..0005 0.013 3
7.5° 0.001 0.0254 1
7.5° 0.002 0.051 2
15° 0.00164 0.04166 AS
15° 0.002 0.051 2
15° 0.004 0.102 4

 

DIMENSIONAL DRAWING - Z26000 SERIES

Captive Shaft

DIMENSIONAL DRAWING - Z26000 SERIES

Non-Captive

STANDARD SCREW LENGTH AVAILABLE - Up To 6" (152mm)

DIMENSIONAL DRAWING - Z26000 SERIES

External

STANDARD SCREW LENGTH AVAILABLE - Up To 6" (152mm)

PERFORMANCE CURVES - Z26000 SERIES / STEP RATE VS. THRUST

 

BIPOLAR L/R DRIVE 100% DUTY CYCLE

 

 

BIPOLAR L/R DRIVE 25% DUTY CYCLE
25% Duty cycle is obtained by a special winding or by running a standard motor at double the rated voltage


NOTE:Ramping can increase the performance of a motor either by increasing the top speed or getting a heavier load accelerated up to speed faster. Also, deceleration can be used to stop the motor without overshoot.

 

PERFORMANCE CURVES - Z26000 SERIES / STEP RATE VS. THRUST

 

 BIPOLAR CHOPPER DRIVE 100% DUTY CYCLE

BIPOLAR CHOPPER DRIVE 25% DUTY CYCLE
25% Duty cycle is obtained by a special winding or by running a standard motor at double the rated current.

NOTE:All chopper drive curves were created with a 5 Volt motor and a 40 Volt power supply.

Ramping can increase the performance of a motor either by increasing the top speed or getting a heavier load accelerated up to speed faster. Also, deceleration can be used to stop the motor without overshoot.