| On board or external step pulse clock |
Y
|
| On board or external single step switch |
Y
|
| On board or external step rate control potentiometer |
Y
|
| On board or external direction control |
Y
|
| On board or external full step/half step control |
Y
|
| Onboard or externanl outputs enable control |
Y
|
| On board output current control potentiometer |
Y
|
| External "home" output |
Y
|
| External reset control |
Y
|
| External chopper synchronous output |
Y
|
|
The Haydon™ bipolar chopper drive has been designed for easy set-up and use. It is ideal for development projects, just connect a single power supply and a motor and the drive is ready to run. Motor current is set using an on-board potentiometer. No external current setting resistors are required. This feature-packed drive provides all basic motor controls, including full or half stepping of bipolar steppers and direction control. An oscillator circuit is standard on the drive with an on-board speed control potentiometer. In addition, external input/output signals allow complete remote control of all drive functions.
Tech Data
Size: 3.75” x 2.95” x .86” (95.3 mm x 74.9 mm x 38.1 mm)
Power Requirement: Single unregulated, providing +12 VDC to +40 VDC
Output Current: Fully adjustable from 66 mA/ø to 3 A/ø
Continuous Rating: 2A/ø
Peak, non-repetitive rating: 3A/ø
Chopper Frequency: ~20 Khz
Onboard Oscillating Range: < 10 pulses/sec. to > 2000 pulses/sec
Micro Stepping: Full step / Half step capability
|