6600 SERIES HERMETICALLY SEALED LONG LIFE SWITCHES
6600 Series switch is designed for harsh environments where long life hermetic seal integrity of the switch is critical. The 130,000 cycle minimum hermetic life of the switch equates to life of aircraft reliability for many applications.
The rugged design and construction incorporates a metal bellows to insure durability of the actuation mechanism. The switch housing is backfilled with inert Nitrogen gas and sealed. Hermetic sealing is maintained per category 5 of MIL-PRF-8805 i.e. 1x10-8 atm cc/sec. The corrosion resistant housing withstands most media and allows exposure of the switch to fluids such as synthetic hydraulic oils and jet fuels.
The switch has been designed to operate below 5 mA at 28 VDC in temperatures as high as 400° F. By changing contact material the switch can be configured for 5 Amp operation.
Assemblies Available The 6600 series switches are available in a wide variety of actuator assemblies. Typical assemblies include leaf actuators, roller leaf assemblies and plunger actuators. Haydon Kerk Motion Solutions can also provide customization assemblies to meet specific operational requirements. View Typical Assemblies
Maximum Operating Force
22 oz. (6.12 N)
Minimum Release Force
3 oz. (.835 N)
Movement Differential
.005" (0.13 mm)
Weight
.5 oz. (14.2 g)
Overtravel Stop
.006" available (0.15 mm)
Electrical Rating
28VDC/115VAC, 400 Hz
Resistive
5 Miliamps
Dielectric Withstanding Voltage
1000V rms at sea level for 1 minute or 1250V rms for 1 second with maximum leakage current 0.5 milliamperes. Can be supplied to meet 1500V rms withstand voltage with reduction in life.
Contact Arrangement
SPDT
Contact Gap
.015" (.381 mm) Minimum
Temperature Range
-65°F to 400°F (-54°C to 204°C) continuous
Shock
100g for 6 ± 1 ms
Vibration
10 - 2000 Hz 20g peak